Container Block Ice Plant :- Container Block Ice Plant : TECHNICAL DATA
Ice making capacity
|
10 To 12ton/24hr
|
|
Weight of a single block
|
25 kgs
|
|
No of ice block
|
400 pcs
|
|
Ambient temp.
|
48 max.
|
|
Wet bulb temp.
|
29 deg.c.
|
|
Qty of feeding water
|
500 ltr/hr.aprox
|
|
Connected load (ice plant)
|
50hp.
|
|
Supply 3 phase
|
380 to 400 volts.
|
|
Frequency
|
50 hz.
|
|
Comp.motor starter.
|
Star delta
|
|
Qty.of the freon charge to the plant
|
140 k.g aprox.
|
|
Kind of brine
|
Mg.cl2/calc cl2
|
|
Quantity of cl
|
4,500 kg.aprox.
|
|
No of ice cans
|
200 pcs.
|
|
No of ice can frame
|
10 OR 5 pcs
|
|
No of compressor (ice plant)
|
1 no
|
|
Evaporation temp
|
Minus 16 deg c.
|
|
Condensation temp.
|
41 deg.c.
|
|
Compressor motor power
|
40 hp
|
|
Brine circulation pump.
|
3.5.kw.
|
|
Water circulation pump
|
2.5 kw
|
|
Weight of the plant without brine
|
12,000 k.g.
|
|
Dimension of the plant
|
Length-12,060mm
|
|
|
Width –2,250mm
|
|
|
Hight-2,300mm
|
|
Connected power
|
56 hp.
|
Container Block Ice Plant SPECIFICATION
(1-1) CONTAINER.
SEA WORTH CONTAINER TO CARRY 30,000 K.G. WEIGHT. MEASURING 40 FT. LENGTH. 8.8 FT. WIDTH. AND 9.5 FT. HIGHT. ALL THE COLOUMS OF THE CONTAINER, FLOOR, IS MADE OF ADEQUATE CORROSION RESISTANCE M.S PLATE AND WOODEN DECK. THE CONTAINER IS PAINTED AFTER INSTALLATION OF THE MACHINERY. THERE WILL BE ONE MORE DOOR OPENING FOR THE PLANT ROOM FOR OPERATING THE PLANT. AFTER THAT THE CONTAINER WILL BE READY FOR SHIPMENT.
(1-2) REFRIGERATION COMPRESSOR.
RECIPROCATING COMPRESSOR ,OPEN TYPE,CONNECTED WITH ELECTRIC
MOTOR BY DIRECT COUPLING OR BELT DRIVE.THE UNIT EQUIPED WITH
IN.
- SUCTION & DISCHARGE STOP VALVE.
- SAFETY VALVES & CONTROLS.
- SUCTION FILTERS.
- OIL LEVEL GLASS.
- SUCTION/DISCHARGE/OIL PRESSURE GUAGE.
- HIGH/LOW PRESSURE CUT OUT.
- OIL PRESSURE CUT OUT.
(1-3) WATER COOLED CONDENSOR.
(1-4) AUTOMATIC ELECTRIC CONTROL PANEL BOARD.
THE PANEL BOARD MADE WITH THE STAINLESS STEEL METAL
EXECUTION FOR 3 PHASE 380 VOLTS,50 HZ WITH THE FOLOWING
ACCESSORIES.
- MAIN ON/OFF SWITCH.
- VOLTS/AMPS METER.
- STAR DELTA STARTER FOR COMPRESSOR MOTOR.
- INDICATOR LIGHTS.
- OVER LOAD RELAY PROTECTOR.
- CIRCUIT BREAKER.
- CONNECTOR & RELAY FOR FAN MOTOR/PUMP.
- EMERGENCY STOP SWITCH.
(1-5) REFRIGERANTS : ( R22) .
(1-6) SAFETY DEVICES:
HIGH PRESSURE SWITCH.
LOW PRESSURE SWITCH.
OIL FAILURE SWITCH.
SAFETY VALVE.
(1-7) Container Block Ice Plant MAKING TANK DEVICE:
THE ICE GENERATION TANK MADE BY 6 MM.THICK MILD STEEL
PLATE. THE TANK PROVIDED WITH INSULATION THICKNESS (120MM) DENSITY,(40KG/M3) AND THE TANK IS COVERED BY REMOVABLE LIDS
1) BRINE CHILLER: IS MADE OF COPPER PIPE. AND M.S. SHELL.OR
PHE.
2) ICE CANS :MADE OF G.I THICK 1.25MM FOR 25 KG ICE BLOCK.
3) ICE: CAN FRAMES MADE OF M.S FOR HOISTING ICE.
4) CRANE : ELECTRIC HOIST WITH CRANE WAY ABOVE THE ICE TANK
5) THAWING TANK : MADE OF M.S WITH TH/ST & HEATER.
6) BRINE AGITATOR : ONE NO AGITATOR OR 1 NO BRINE PUMP.
8) ICE CAN FILLING DEVICE : SEMI AUTOMATIC FILLING OF ICE CAN
IN ONE FRAME AND THE DEVICE WILL WORK THE ICE CANS ARE
FILLED WITH THE CORRECT RATE OF WATER QUANTITY WHICH
CORRESPONDS EXACTLY TO THE BLOCK OF WEIGHT.
9) WATER STORAGE TANK : MADE OF SS DULY INSULATED
10) INTER CONNECTING PIPES AND AUTOMATIC VALVES,INSULATION
MATERIALS –1 LOT.
MATERIALS SPECIFICATION FOR THE REFRIGERATION UNIT
1) THE ELECTRIC PANEL BOARD WILL OPERATE ON BOTH DIESEL
GEN SET AND ALSO ELECTRIC POWER SUPPLY (SPLIT UNIT)
380/440V,3 PHASE –50HZ,TROPICAL WIRING,INCLUDING CONTROL
BOX & MAIN SWITCH.
2) REFRIGERATION CIRCUIT: ARE INCLUDED RECEIVER,SIGHT GLASS EXPANSION VALVE,FILTER DRIER,SHUT OFF VALVES AND ALL NECESSARY PARTS.
3) REFRIGERANT GAS : FREON (R-22) OR AMMONIA
4) STORAGE TEMP: (-6DEG.C)
5) HIGH LOW PRESSURE SWITCH MEASURES OVER LOAD ON MOTORS
THERMOSTATE AND THERMOMETER.
